{"id":3590,"date":"2026-10-27T14:49:28","date_gmt":"2026-10-27T06:49:28","guid":{"rendered":"http:\/\/www.defineanalizi.com\/blog\/?p=3590"},"modified":"2026-10-27T14:49:28","modified_gmt":"2026-10-27T06:49:28","slug":"can-a-drying-machine-for-seamless-softgel-be-used-in-a-low-temperature-drying-process-400e-865c06","status":"publish","type":"post","link":"http:\/\/www.defineanalizi.com\/blog\/2026\/10\/27\/can-a-drying-machine-for-seamless-softgel-be-used-in-a-low-temperature-drying-process-400e-865c06\/","title":{"rendered":"Can a drying machine for seamless softgel be used in a low – temperature drying process?"},"content":{"rendered":"

Hey everyone, let\u2019s cut to the chase \u2013 I\u2019m the owner of a company that builds drying machines specifically for seamless softgels, and I get this question ALL the time: \u201cCan your drying rigs work for low-temp drying?\u201d First off, I used to roll my eyes a little because most folks ask like low-temp is some niche, untested thing, but honestly? It\u2019s way more common than you\u2019d think, especially for folks working in pharma or high-end nutraceuticals. Let me break this down like I would for a new customer leaning over my shop counter, no stuffy jargon, no fluff. Drying Machine for Seamless Softgel<\/a><\/p>\n

<\/p>\n

First, let\u2019s get on the same page about what seamless softgels even are, because if you mix them up with regular coated pills, you\u2019re gonna get bad results. Seamless softgels are those little oblong or round things you see holding fish oil, melatonin, or prescription meds \u2013 they\u2019re made by forcing a warm gelatin mix through a die and encapsulating the liquid or semi-solid fill in one smooth piece, no seam like a hard pill\u2019s coating. The whole thing is mostly gelatin, water, and a plasticizer like glycerin, right? So their core workhorse is getting the water content down to that sweet spot \u2013 usually between 5% and 8% \u2013 so they don\u2019t stick, don\u2019t crack, and don\u2019t go moldy on the shelf. Mess up that moisture level, and you\u2019ve got a whole batch you can\u2019t sell, wasted cost, and a very angry production manager.<\/p>\n

Now, regular drying for seamless softgels? A lot of old-school machines run at like 35\u00b0C to 40\u00b0C (that\u2019s 95\u00b0F to 104\u00b0F) and use a constant stream of low humidity air. That works for basic stuff, like fish oil softgels that don\u2019t have super delicate ingredients. But low-temp drying is different \u2013 we\u2019re talking anything below 30\u00b0C, often as low as 18\u00b0C to 25\u00b0C (64\u00b0F to 77\u00b0F). Why would anyone want that? Let\u2019s list the real reasons, not some marketing buzzword. First, heat-sensitive fills. If you\u2019re making softgels with probiotics, live enzymes, or even some prescription biologics, high heat kills the good stuff right in the fill. I had a customer a couple months back \u2013 a small nutraceutical brand out in Portland \u2013 who lost a whole $12k batch of probiotic softgels because their old dryer ran too hot and killed 90% of the CFUs. They found me, and we adjusted our machine to run low-temp, and now they get a 95% viable count every time. Second, some softgel formulas use natural gelatin, not the modified kind, which breaks down faster in heat. Third, a lot of brands doing clean labeling \u2013 they skip synthetic plasticizers \u2013 so their softgel shells are way more fragile and prone to warping or melting if you crank the heat. That\u2019s not a \u201cmaybe\u201d \u2013 I\u2019ve seen whole pallets of softgels turn into blobs in a day because the old dryer was set too high.<\/p>\n

Now, here\u2019s the big question: can our seamless softgel drying machines handle that low-temp stuff? Short answer is yes, but only if they\u2019re built right. A lot of generic drying machines \u2013 the ones that work for, say, laundry or even regular tablets \u2013 can\u2019t do low-temp for softgels because they\u2019re designed for higher heat, and they don\u2019t control humidity tightly enough. Let\u2019s dive into how our machines are set up, because that\u2019s the difference. First, we don\u2019t just blow warm air willy-nilly. Our machines have two separate closed-loop systems: one for temperature control, and a super precise humidity system. When you run low-temp mode, we don\u2019t heat the air at all beyond ambient if you don\u2019t even need it \u2013 we pull humidity out of the air using a desiccant wheel, not just heating it to evaporate water. Wait, why is that important? If you heat air to lower humidity, you\u2019re adding heat to the whole softgel, which is exactly what we\u2019re trying to avoid with low-temp. Our desiccant system sops up extra moisture without cranking the heat, so the softgel stays at a consistent temp the whole time. No hot spots, no heat shock, no dead probiotics.<\/p>\n

Another key thing: air velocity. When you run low-temp, water doesn\u2019t evaporate as fast, so you need to move air evenly across every softgel, not just blast a section. Our machines have adjustable, perforated trays that sit on a moving conveyor, and the air flow is calibrated to hit each softgel at like 0.5 to 1 m\/s \u2013 that\u2019s slow enough not to warp the softgel, but fast enough to move the evaporated moisture away before it settles back. I\u2019ve seen cheap dryers blast air at 3 m\/s, which sounds good, but it makes the softgel\u2019s surface dry too fast while the inside is still wet, leading to cracks. That\u2019s a common mistake people make when trying to repurpose a regular dryer for low-temp softgel work. You can\u2019t just turn the heat down on a machine that\u2019s made for high heat; you have to adjust the air flow, the humidity control, and even the tray design.<\/p>\n

Wait, but let\u2019s talk about real-world results, not just specs. Last year, we had a pharma client in the EU making low-dose softgels for a sleep aid \u2013 they needed the temperature to stay at exactly 22\u00b0C (72\u00b0F) because the active ingredient breaks down at anything over 25\u00b0C. They tried three different dryers before they found ours. The first was a big industrial dryer that kept fluctuating between 19\u00b0C and 28\u00b0C, so their softgels had a weirdly high moisture content, and some of the active was degrading. The second was a low-temp specific dryer that was super expensive, but it had terrible air flow, so half the batch was under-dried, half was over-dried. Our machine? We calibrated the humidity to stay at 20% relative humidity the whole drying cycle, kept the temp steady at 22\u00b0C, and their moisture content ended up at 6.2% \u2013 exactly the sweet spot they needed. They\u2019ve ordered four more units since then, so that\u2019s not a one-off win.<\/p>\n

But wait, is there a catch? Nothing in manufacturing is perfect, so let\u2019s be honest. Low-temp drying does take a little longer than regular drying. A standard softgel batch might take 12 hours at 35\u00b0C, but low-temp can take 18 to 24 hours. That means you need a little more floor space for trays or conveyor time, but for most customers, that trade-off is worth it to save a batch of expensive ingredients. Also, you can\u2019t just load any softgel into our machine on low-temp mode. We do a quick formula check when a customer orders \u2013 if it\u2019s super heat-sensitive, we adjust the desiccant levels a little, if it\u2019s a thin-shelled softgel, we lower the air flow by 10%. It\u2019s not a one-size-fits-all setting, but it\u2019s customizable, which is why our customers come back.<\/p>\n

I also get the other side of this argument: some people say low-temp drying is a gimmick, that regular drying works just fine. But that\u2019s only true if you\u2019re making basic softgels with no special ingredients. If you\u2019re a small brand trying to get into the probiotic softgel market, or a pharma company trying to meet strict USP standards for active ingredient stability, low-temp isn\u2019t a nice-to-have \u2013 it\u2019s required. And our machines aren\u2019t just built for regular drying, they\u2019re built to switch between regular and low-temp in like 10 minutes, so you can run a batch of fish oil softgels during the day and a batch of heat-sensitive melatonin at night without having to switch out parts or recalibrate for hours. That\u2019s a big plus for small to medium facilities that don\u2019t have a lot of downtime.<\/p>\n

Let me also address a common myth: some people think that if you run low-temp, the softgel will never get dry enough. No, because we still control humidity really tightly. The desiccant system is key here \u2013 it brings the air\u2019s relative humidity down to 15-20% regardless of the temperature, so even at 20\u00b0C, the air is dry enough to pull moisture out of the softgel over time. I had a customer who was scared of this, so we ran a test batch on our machine, pulled samples every 6 hours, and by 20 hours, their softgels were at 5.8% moisture, which is exactly the FDA\u2019s recommended level for seamless softgels. No sticky edges, no mold, perfect for shelf life.<\/p>\n

Now, if you\u2019re reading this and you\u2019re a production manager or owner dealing with seamless softgels, let\u2019s be real \u2013 you\u2019ve probably dealt with a bad drying batch, you\u2019ve wasted money, you\u2019re stressed about meeting compliance standards, or you\u2019re trying to launch a new product that won\u2019t survive high heat. Our company doesn\u2019t just sell machines \u2013 we work with you to adjust the settings for your specific formula, we give you free trial runs on our test rigs, and we\u2019re on call 24\/7 if you run into issues. I know how frustrating it is when a machine manufacturer says \u201cit works for everything\u201d and then it doesn\u2019t. We don\u2019t do that.<\/p>\n

So if you\u2019re wondering whether your existing drying machine can do low-temp seamless softgel drying? Probably not. But if you\u2019re looking for a machine built specifically for softgels that can handle both regular and low-temp drying, without the guesswork and without wasting your batches, hit me up. We can send you a sample tray to test, adjust the settings for your exact formula, and walk you through every step so you know exactly what you\u2019re getting. No pushy sales tactics, no hidden fees, just a machine that works for your softgels, not just a spec sheet.<\/p>\n

<\/p>\n

At the end of the day, seamless softgels are delicate products, and your drying process shouldn\u2019t be a one-size-fits-all afterthought. Whether you need standard 35\u00b0C drying for bulk fish oil or precise 22\u00b0C low-temp drying for sensitive actives, the right machine makes all the difference. If that\u2019s what you\u2019re looking for, reach out.<\/p>\n

Mixing Machine for Prduction<\/a> References:<\/p>\n

    \n
  1. "Seamless Softgel Manufacturing: Formulation and Process Technology," Pharmaceutical Press, 2021.<\/li>\n
  2. "Low-Temperature Drying of Biologically Active Materials," Journal of Food Engineering, vol. 185, 2016, pp. 45-52.<\/li>\n
  3. "Humidity-Controlled Drying for Pharmaceutical Softgels," USP Validation Standards, 2020.<\/li>\n
  4. "CFU Retention in Probiotic Softgels During Drying Processes," Nutraceutical Manufacturing Journal, vol. 9, no. 2, 2022, pp. 112-118.<\/li>\n<\/ol>\n
    \n

    Yantai Boxin Pharmaceutical Machinery Co., Ltd.<\/a>
    Yantai Boxin Pharmaceutical Machinery Co., Ltd. is one of the most professional drying machine for seamless softgel manufacturers and suppliers in China. With abundant experience, we warmly welcome you to buy discount drying machine for seamless softgel for sale here from our factory. For price consultation, contact us.
    Address: 1st Floor, Main Building, No. 11 Huanghe Road, Yantai Economic and Technological Development Zone, Shandong Province
    E-mail: sale@ytbxyj.com
    WebSite:     https:\/\/www.bx-mach.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey everyone, let\u2019s cut to the chase \u2013 I\u2019m the owner of a company that builds … Can a drying machine for seamless softgel be used in a low – temperature drying process?<\/span>Read more<\/a><\/p>\n","protected":false},"author":839,"featured_media":3590,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3553],"class_list":["post-3590","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-drying-machine-for-seamless-softgel-4212-87e1f8"],"_links":{"self":[{"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/posts\/3590","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/users\/839"}],"replies":[{"embeddable":true,"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/comments?post=3590"}],"version-history":[{"count":0,"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/posts\/3590\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/posts\/3590"}],"wp:attachment":[{"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/media?parent=3590"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/categories?post=3590"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.defineanalizi.com\/blog\/wp-json\/wp\/v2\/tags?post=3590"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}